Fast cure, Water resistance, Tar epoxy, Drinking water pipe inside coating.
KINGMIDE 150-50
KINGMIDE 300
50±2
Xylene/Isobutanol (70/30)
48±5
950
9Max.
S-W(3)
160~220(1)
Curing agent for solid epoxy coating, Fast dry, Good adhesion primers.
KINGMIDE 300-65
KINGMIDE 300
65±2
Xylene/Isobutanol (70/30)
64±5
750
9Max.
Z-Z6(3)
130~170(1)
Curing agent for solid epoxy coating, Fast dry, Good adhesion primers.
KINGMIDE 305-31
KINGMIDE 306-GC
31±2
Isobutanol/MIBK/Xylene (32/22/46)
75±10
560
8Max.
< A(3)
90~120(1)
Paint (General, Zinc-rich, Tar).
KINGMIDE 305-31MI
KINGMIDE 306-GC
31±2
Isobutanol/MIBK (60/40)
75±10
560
6Max.
<A(3)
90~120(1)
Paint (General, Zinc-rich, Tar).
KINGMIDE 305-50
KINGMIDE 305
50±2
Xylene/Isobutanol (70/30)
120±20
360
9Max.
C-H(3)
70~90(1)
Paint (General, Zinc-rich, Tar), Good corrosion resistance.
KINGMIDE 305-60
KINGMIDE 305
60±2
Xylene/Isobutanol (70/30)
147±10
300
9Max.
L-R(3)
50~70(1)
Paint (General, Zinc-rich, Tar), Good corrosion resistance.
KINGMIDE 305-70
KINGMIDE 305
70±2
Xylene/Isobutanol (70/30)
170±10
250
9Max.
W-Z(3)
40~60(1)
Paint (General, Zinc-rich, Tar), Good corrosion resistance.
KINGMIDE 305-70X
KINGMIDE 305
70±2
Xylene(100)
170±10
250
9Max.
T-W(3)
40~60(1)
Paint (General, Zinc-rich, Tar), Good corrosion resistance.
KINGMIDE 315-80
KINGMIDE 315
80±2
Xylene/Isobutanol (70/30)
270±20
150
9Max.
X-Z2(3)
20~35(1)
Water resistance, High performance epoxy paint, Tar epoxy, Fast dry.
☆THEO.A.H.E.W=(THEORETICAL ACTIVE HYDROGEN EQUIVALENT WEIGHT)
The physical properties of the cured epoxy resin system will change with different mixed ratio of the hardener.
The value listed on the above table is the average value of many datas which are obtained by the different physical properties test at the ambient temperature in the laboratory.
(1)The parts of Hardener by weight to 100 parts of Epoxy Resin (EEW : 450~500)
(2)The parts of Hardener by weight to 100 parts of Epoxy Resin (EEW : 180~200)
(3)Measured by a Gardner Bubble Viscometer at 25°C.
