Low viscosity, Fast cure, Good chemical resistance, Accelerator for other polyamide and modified polyamine curing agent, Suitable for fast setting adhesives, Solvent-free coatings.
KINGCURE E-325
30~100
360±30
95
5Max.
45~55
0.97
40Min.
Low viscosity, Solvent-free coatings, Self-leveling floors, High gloss coatings, Good chemical resistance.
KINGCURE M-510
500~2,000
330±25
85
18Max.
45~55
1.13
18Min.
Low viscosity with rapid cure, Suitable for primer coating of civil engineering under high humidity and Low temperature.
KINGCURE M-510BS
300~700
280±20
95
18Max.
45~55
1.13
30Min.
Pot life longer than KINGCURE M-510.
KINGCURE M-530
200~500
300±20
95
18Max.
45~55
1.06
Semi-gel
Pot life longer than KINGCURE M-510BS.
KINGCURE T-642NA
<80
1150±70
36
4Max.
15~25
0.99
14Min.
Low viscosity, Light color, Fast-setting adhesives, Very suitable for marble surface repair.
Flooring material, Primer for lining. (Wet surface type)
☆THEO.A.H.E.W.=(THEORETICAL ACTIVE HYDROGEN EQUIVALENT WEIGHT)
The physical properties of the cure epoxy resin system will change with different mixed ratio of the hardener.
The value listed on the above table is the average value of many datas which are obtained by the different physical properties test at the ambient temperature in the laboratory.
(1)Brookfield RVT Type1 mPa‧s=1cP
(2)The parts of Hardener by weight to 100 parts of Epoxy Resin (EEW:180~200)